- No products in the cart.
Description
Fi-Clor Spa Soda Ash is a pH increaser that should be used to correct the pH when it is below 7.2. Spa water which is acidic is uncomfortable to bathe in and, if left unchanged, can cause corrosion of metal parts and fittings.
INSTRUCTIONS
DO NOT MIX WITH OTHER PRODUCTS. DO NOT DISSOLVE BEFORE USE.
1. Take a pH reading using test strips or test tablets. Increase the pH if the reading is below 7.2.
2. The dose rate is 10g Fi-Clor Spa pH Increaser per 1,000 litres (220 galls) of spa water. Each dose increases the pH by approx 0.2.
3. With the circulation system running, dose directly in several areas around the spa, avoiding the skimmer. Only dose when bathing has ceased.
4. Continue filtration & re-test after 15 minutes.
5. Repeat treatment until the pH falls within the range 7.2 - 7.6.
RELATED PRODUCTS
5kg pH Increaser
Swimfresh pH Increaser (Soda Ash) is for raising the pH level in swimming pool water. pH is a measure of how acid or how alkaline the water is. Low pH can...
Pool Check 3 in 1
Pool Check® 3in1 offers the user more than just another test strip; it offers accurate results that you can rely on. Pool Check® 3in1 has been specially designed to work...
5kg Chlorine Tablets 200gm
Ideal Levels Prior to using this product, adjust the pH levels to the ideal range of 7.2-7.6 to promote bather comfort, plant protection and effective chemical use. The tablets are...
5ltr Winterfresh
This effective copper free algaecide will help prevent the multiplication of most types of algae over the winter. It also prevents staining and scale formation. This product is compatible with...
2kg Stabilised Chlorine Granules
Chlorine Granules are ideal for daily dosing of your swimming pool or spa, to produce free active chlorine which kills bacteria and other potentially harmful organisms. They are rapid dissolving...
1Ltr Anti-foam
Fi-Clor Spa Anti-Foam enables you to deal with foaming on the surface of the water which is often caused by a build-up of soaps, shampoos, detergents or skin treatment products....
7kg PH Reducer -
The ideal pool water levels for pH and Total Alkalinity (TA) are 7.2-7.6 for pH and 80-150ppm(mg/l) for Total Alkalinity. Depending on the method of application, the reducer will either...
2kg Chlorine Tablets 200gms
Ideal Levels Prior to using this product, adjust the pH levels to the ideal range of 7.2-7.6 to promote bather comfort, plant protection and effective chemical use. The tablets are...