- No products in the cart.
Description
Fi-Clor spa cartridge filter cleaner enables you to clean the filter cartridge in your hot tub or spa. Removing grease, oil and trapped debris, therefore restoring the filter to optimum efficiency.
INSTRUCTIONS
DO NOT MIX WITH OTHER PRODUCTS. DO NOT DISSOLVE BEFORE USE.
1. Periodically remove the cartridge filter, especially when the water in the spa is being replaced.
2. Using fresh water, rinse off any particles clinging to the surface of the cartridge. Do not use a pressure washer as this may damage the cartridge.
3. Use 1 litre Fi-Clor Spa Cartridge Cleaner per 10 litres of water. Add the product to the water in a clean plastic pail large enough to cover the filter when full.
4. Place the filter in the solution overnight.
5. Remove the filter, rinse off with fresh water and allow to dry before replacing.
6. It is a good practise to have spare clean filter available which can be used while the dirty one is being cleaned.
RELATED PRODUCTS
5kg pH Increaser
Swimfresh pH Increaser (Soda Ash) is for raising the pH level in swimming pool water. pH is a measure of how acid or how alkaline the water is. Low pH can...
Pool Check 3 in 1
Pool Check® 3in1 offers the user more than just another test strip; it offers accurate results that you can rely on. Pool Check® 3in1 has been specially designed to work...
5kg Chlorine Tablets 200gm
Ideal Levels Prior to using this product, adjust the pH levels to the ideal range of 7.2-7.6 to promote bather comfort, plant protection and effective chemical use. The tablets are...
5ltr Winterfresh
This effective copper free algaecide will help prevent the multiplication of most types of algae over the winter. It also prevents staining and scale formation. This product is compatible with...
2kg Stabilised Chlorine Granules
Chlorine Granules are ideal for daily dosing of your swimming pool or spa, to produce free active chlorine which kills bacteria and other potentially harmful organisms. They are rapid dissolving...
1Ltr Anti-foam
Fi-Clor Spa Anti-Foam enables you to deal with foaming on the surface of the water which is often caused by a build-up of soaps, shampoos, detergents or skin treatment products....
7kg PH Reducer -
The ideal pool water levels for pH and Total Alkalinity (TA) are 7.2-7.6 for pH and 80-150ppm(mg/l) for Total Alkalinity. Depending on the method of application, the reducer will either...
2kg Chlorine Tablets 200gms
Ideal Levels Prior to using this product, adjust the pH levels to the ideal range of 7.2-7.6 to promote bather comfort, plant protection and effective chemical use. The tablets are...