Swimfresh pH Increaser (Soda Ash) is for raising the pH level in swimming pool water. pH is a measure of how acid or how alkaline the water is. Low pH can...

Pool Check® 3in1 offers the user more than just another test strip; it offers accurate results that you can rely on. Pool Check® 3in1 has been specially designed to work...

Ideal Levels Prior to using this product, adjust the pH levels to the ideal range of 7.2-7.6 to promote bather comfort, plant protection and effective chemical use. The tablets are...

This effective copper free algaecide will help prevent the multiplication of most types of algae over the winter. It also prevents staining and scale formation. This product is compatible with...

Chlorine Granules are ideal for daily dosing of your swimming pool or spa, to produce free active chlorine which kills bacteria and other potentially harmful organisms.  They are rapid dissolving...

Fi-Clor Spa Anti-Foam enables you to deal with foaming on the surface of the water which is often caused by a build-up of soaps, shampoos, detergents or skin treatment products....

The ideal pool water levels for pH and Total Alkalinity (TA) are 7.2-7.6 for pH and 80-150ppm(mg/l) for Total Alkalinity. Depending on the method of application, the reducer will either...

Ideal Levels Prior to using this product, adjust the pH levels to the ideal range of 7.2-7.6 to promote bather comfort, plant protection and effective chemical use. The tablets are...

Granular Floc sinks unwanted debris to the bottom of the pool creating clear sparkling water. Application Instructions 1. Maintain pH levels within the ideal range 7.2 - 7.6. If the...

Fi-Clor Spa Hardness Increaser should be used to raise the calcium hardness level in spa and hot tub water. Calcium hardness is the amount of dissolved calcium and magnesium in pool...

Fi-Clor Spa Alkalinity Increaser should be used to raise the total alkalinity level in spa water. Alkalinity is a measure of the total amount of alkali in spa water. If...

Fi-Clor Spa Soda Ash is a pH increaser that should be used to correct the pH when it is below 7.2. Spa water which is acidic is uncomfortable to bathe...

Fi-Clor Spa pH & Alkalinity Reducer should be used to correct high levels of pH (above 7.6) or alkalinity (above 160mg/l). High pH and/or alkalinity can lead to problems with...

Fi-Clor Spa Water Clarifier should be added to spa and hot tub water to restore water quality. It coagulates fine particles suspended in the water until they are large enough...

Fi-Clor Spa Anti-Scale has been formulated to help prevent the formation of scale on spa surfaces in hard water and facilitate cleaning of vulnerable areas. It is compatible with all...