- No products in the cart.
Previous product
Back to products
Back to products
1Ltr Water Clarifier
$21.00 $18.00
Next product
1 Ltr Cartridge Cleaner
$21.00 $16.80
1 Ltr Anti-scale
Description
Fi-Clor Spa Anti-Scale has been formulated to help prevent the formation of scale on spa surfaces in hard water and facilitate cleaning of vulnerable areas. It is compatible with all types of filter (sand, cartridge) and contains no phosphate.
INSTRUCTIONS
DO NOT MIX WITH OTHER PRODUCTS. DO NOT DISSOLVE BEFORE USE.
1. Fi-Clor Spa Anti-Scale can be dosed directly into the spa but should be used only when bathing has ceased.
2. The dose rate is 50ml of Anti-Scale to 1,000 litres (220 galls) of spa water. Dose into an area of the spa where there is good water movement and keep the circulation running.
3. Bathing may resume after 10 minutes with the circulation on.
4. Repeat the dose every time fresh water is introduced inti the spa.
5. The dose rate can be doubled where the mains top up water is particularly scale forming.
RELATED PRODUCTS
Pool Check 3 in 1
Pool Check® 3in1 offers the user more than just another test strip; it offers accurate results that you can rely on. Pool Check® 3in1 has been specially designed to work...
1Ltr Anti-foam
Fi-Clor Spa Anti-Foam enables you to deal with foaming on the surface of the water which is often caused by a build-up of soaps, shampoos, detergents or skin treatment products....
1kg Hardness Increaser
Fi-Clor Spa Hardness Increaser should be used to raise the calcium hardness level in spa and hot tub water. Calcium hardness is the amount of dissolved calcium and magnesium in pool...
1.2kg Alkalinity Increaser
Fi-Clor Spa Alkalinity Increaser should be used to raise the total alkalinity level in spa water. Alkalinity is a measure of the total amount of alkali in spa water. If...
1.2kg Soda Ash
Fi-Clor Spa Soda Ash is a pH increaser that should be used to correct the pH when it is below 7.2. Spa water which is acidic is uncomfortable to bathe...
2kg Dry Acid
Fi-Clor Spa pH & Alkalinity Reducer should be used to correct high levels of pH (above 7.6) or alkalinity (above 160mg/l). High pH and/or alkalinity can lead to problems with...
1Ltr Water Clarifier
Fi-Clor Spa Water Clarifier should be added to spa and hot tub water to restore water quality. It coagulates fine particles suspended in the water until they are large enough...
1 Ltr Cartridge Cleaner
Fi-Clor spa cartridge filter cleaner enables you to clean the filter cartridge in your hot tub or spa. Removing grease, oil and trapped debris, therefore restoring the filter to optimum...